Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 51 van 124
3 — PROGRAMMABLE PARAMETERS
pg. 43
Return to TOC Curtis Model 1226BL – July 2024
BDI MENU
PARAMETER
CAN INDEX
VALUES
DEFAULT
RAW VALUES
DATA SIZE DESCRIPTION
Reset Volts Per Cell
0x33A701
0.900–3.000V
2.090V
900–3000
16-bit
Species the battery cell voltage at or above which the
controller resets the BDI percentage to 100% if both of the
following conditions are true when the vehicle is powered up:
• Keyswitch Voltage > (Reset Volts Per Cell * the number
of cells)
• BDI percentage < BDI Reset Percent
Specify a voltage that is higher than the Full Volts Per Cell voltage.
Full Volts Per Cell
0x33A401
0.900–3.000V
2.040V
900–3000
16-bit
Species the battery cell voltage at or above which the battery
is considered 100% charged. When the battery voltage drops
below this voltage, the battery begins to lose charge.
Empty Volts Per Cell
0x33A301
0.900–3.000V
1.730V
900–3000
16-bit
Species the battery cell voltage at which the battery cell is
considered 0% charged.
Discharge Time
0x33A201
0–600 minutes
600 minutes
0–600
16-bit
Species the minimum time for decrementing the BDI
percentage from 100% to 0% if the battery cell voltage is lower
than the Empty Volts Per Cell voltage.
BDI Reset Percent
0x33A601
0%–100%
75%
0–100
16-bit
Species the percentage of battery voltage above which the
BDI percentage will not reset when the keyswitch is turned on.
When a battery has a high BDI percentage, its oat voltage
when the keyswitch is powered on could cause false BDI
resets. The BDI Reset Percent parameter lets you preempt this
problem by specifying a minimum threshold for resetting the
BDI percentage.
Full Charge Voltage
0x339B01
0.900–3.000V
2.350V
900–3000
16-bit
Species the voltage above which the controller considers the
battery as nished charging.
Start Charge Voltage
0x339C01
0.900–3.000V
2.100V
900–3000
16-bit
Species the voltage above which the controller considers the
battery as starting to charge.
Charge Time
0x339D01
0–600 minutes
300 minutes
0–600
16-bit
Species how many minutes it takes for the BDI percentage to
increase from 0% to 100% while the battery is being charged.
When a charger is plugged in, the battery voltage gradually
increases to the full level. To accurately reect the state-of-
charge, during charging the BDI percentage increases by 1%
when the specied number of minutes elapses.
Note: Higher battery amp/hour ratings require a larger
Charge Time.
Note: Some parameters congure the controller’s overvoltage and undervoltage protection, which
is described in Overvoltage and Undervoltage Protection.
e controller can apply a speed limit when the battery’s state-of-charge is low. e parameters on
the Low BDI menu congure the speed limit.
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
