Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 49 van 124
3 — PROGRAMMABLE PARAMETERS
pg. 41
Return to TOC Curtis Model 1226BL – July 2024
e following table describes the conditions that cause the controller to release and engage the EM
brake when EM braking is enabled. e following parameters are factors:
• Interlock Brake Enable
• EM Brake Type
• Set Speed reshold
• Sequencing Delay
Table 3 EM Brake Response
EM Brake Type
Parameter Release Engage
1 The interlock is on. Depends upon whether interlock braking is enabled:
• Interlock braking enabled: The EM brake
engages when the interlock turns off, the motor
speed is less than the Set Speed Threshold
value, and the sequencing delay expires.
• Interlock braking disabled: The EM brake
engages when the interlock turns off and the
sequencing delay expires.
2 The interlock is on and the throttle
is not in neutral.
The EM brake engages when the throttle command
is 0 and the motor speed is less than the Set Speed
Threshold value.
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
