Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 40 van 124
3 — PROGRAMMABLE PARAMETERS
Curtis Model 1226BL – July 2024 Return to TOC
pg. 32
THROTTLE MENU
Use the rottle menu to specify the type of throttle used by the vehicle, congure the throttle’s
responsiveness, and specify whether the HPD/SRO feature is enabled. e following table describes
the menu's parameters.
Note: e Forward and Reverse Deadband, Max, Oset, and Map parameter values are percentages
of the throttle's maximum wiper voltage or resistance.
THROTTLE MENU
PARAMETER
CAN INDEX
VALUES
DEFAULT
RAW VALUES
DATA SIZE DESCRIPTION
Throttle Type
[PCF]
0x334001
2–7
2
2–7
16-bit
Species the throttle type:
2 = 3-wire pot
3 = Reserved
4 = Wigwag 3-wire pot
5 = 0–5V voltage source
6 = 0–5V wigwag
7 = CAN throttle
CAN Throttle Type
0x336001
Enumerated
Single-ended CAN
Throttle
0–1
8-bit
Species the throttle type when CAN is used as the throttle input:
0 = CAN Wigwag
1 = Single-ended CAN Throttle
Forward Deadband
0x334101
0%–100%
10%
0–1000
16-bit
Denes the wiper voltage at the deadband threshold while the
vehicle is moving forward.
Increasing Forward Deadband increases the neutral range.
Forward Max
0x334201
0%–100%
90%
0–1000
16-bit
Denes the wiper voltage that generates 100% controller
output while the vehicle is moving forward.
For a description of the how the Deadband, Max, Offset, and
Map parameters work, see Throttle Response Parameters.
Forward Offset
0x334301
0%–100%
0%
0–32767
16-bit
Species the throttle command that is generated when the
throttle is rst rotated out of the neutral deadband while the
vehicle is moving forward.
For most vehicles, a setting of 0% is appropriate. For heavy
vehicles, however, increasing the offset may improve
controllability by reducing the amount of throttle required to
start moving the vehicle.
Forward Map
0x334401
0%–100%
50%
0–32767
16-bit
Species the controller output that is generated at 50% throttle
input. The following list provides guidelines for setting Forward
Map:
• 50% provides a linear output response to the throttle
position.
• Values below 50% reduce the controller output at
low throttle settings, providing enhanced slow speed
maneuverability.
• Values above 50% give the vehicle a faster, more
responsive feel at low throttle settings.
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
