Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 33 van 124
3 — PROGRAMMABLE PARAMETERS
pg. 25
Return to TOC Curtis Model 1226BL – July 2024
3 — PROGRAMMABLE PARAMETERS
e 1226BL controller has numerous parameters that you can program using a Curtis programming
device. Use these parameters to customize a vehicle’s performance and functionality.
e parameters are grouped hierarchically into menus and are described in the following topics. Each
parameter is identied with a parameter name and CAN Index.
Some parameters require you to cycle the keyswitch aer changing the parameter value. If you do
not cycle the keyswitch, the controller generates a Parameter Change Fault. To clear a Parameter
Change Fault, cycle the keyswitch.
Note: In this chapter, the parameters that require cycling the keyswitch are denoted with [PCF].
e following columns in the parameter description tables contain multiple types of information:
• Parameter and CAN Index: e parameter name and the CAN index and sub-index. is
column also identies parameters marked as [PCF].
• Values and Default: e allowed values as displayed in Curtis programming devices, followed
by the default value.
• Raw Values and Data Size. e allowed values in raw units suitable for CAN, followed by the
object's data size.
SPEED MODE MENU
e controller provides two speed modes. e modes are useful for driving in dierent conditions. For
example, one speed mode can be used for outdoor driving and the other mode for slower indoor driving.
The speed mode parameters let you configure speed-related functions such as minimum and
maximum speeds and acceleration and deceleration rates.
e following topics describe the menus contained by the Speed Mode menu:
• Mode 1 and Mode 2 Menus
• Fine Tuning Menu
• Speed Limit Supervision Menu
Mode 1 and Mode 2 Menus
Use the Mode 1 and Mode 2 menus to congure speed modes 1 and 2, respectively. Both menus
contain parameters with the same names, so the following table describes both menus’ parameters.
e rst column contains the CAN indexes for both modes.
Note: The percentage-based parameters are percentages of the motor’s maximum speed. All
parameters ending in “HS” or “LS” depend upon the HS (High Speed) and LS (Low Speed) parameter
values; see Fine Tuning Menu.
Quick Link:
Fine Tuning Menu p.27
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
