Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 28 van 124
2 — INSTALLATION AND WIRING
Curtis Model 1226BL – July 2024 Return to TOC
pg. 20
Charger Inhibit
e charger inhibit function prevents driving while the vehicle is being charged.
Note: Charger inhibit is not available on 1226BL-615X models.
e charger inhibit input (pin J3-15) is an active low input. To congure the charger inhibit function,
connect one of the following charger terminals to pin J3-15:
• If the charger has a dedicated third terminal that automatically provides charger inhibit,
connect that terminal.
• Otherwise, connect the charger’s B– terminal.
Lift Inhibit Input
e controller provides a li inhibit function that protects against load handling hazards. When the
li inhibit input is active, the controller disables the li driver.
Pin J3-4 or J3-6 can be used as the li inhibit input. Li inhibit can be congured so that the input is
active when the voltage level is below or above a specied threshold. e parameters on the following
menus congure the li inhibit input.
Lift Inhibit Pin Menu
J3-4 Digital/Analog Input 2
J3-6 Digital/Analog Input 1
Inhibit Input
e controller provides an inhibit function. When the inhibit input is active, the controller disables
driving the vehicle and the li and lower drivers.
e parameters on the Inhibit Input menu enable the function and specify the pin used for the inhibit
input and whether the input is a NO or NC switch.
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
