Curtis 1226BL handleiding
Handleiding
Je bekijkt pagina 14 van 124
2 — INSTALLATION AND WIRING
Curtis Model 1226BL – July 2024 Return to TOC
pg. 6
HIGH CURRENT CONNECTIONS
The controller provides five M5x0.8 bolt-on terminals for high current connections. The
recommended torque is 3.5±0.4 Nm. e following table describes the terminals:
Terminal Description
B+ Positive battery input
B– Negative battery input
U Motor phase U
V Motor phase V
W Motor phase W
Note: For guidelines on connecting the motor’s high current wires to the UVW bus bar, see
Characterize the Hall Sensors and UVW Output.
You must heed the following warnings:
Working on electrical systems is potentially dangerous. Protect yourself against
uncontrolled operation, high current arcs, and outgassing from lead-acid batteries:
UNCONTROLLED OPERATION—Some conditions could cause the motor to run out of
control. Disconnect the motor or jack up the vehicle and get the drive wheels off the
ground before attempting any work on the motor control circuitry.
HIGH CURRENT ARCS—Batteries can supply very high power, and arcing can occur if they
are short circuited. Always open the battery circuit before working on the motor control
circuit. Wear safety glasses and use properly insulated tools to prevent shorts.
LEAD-ACID BATTERIES—Charging or discharging generates hydrogen gas, which
can build up in and around the batteries. Follow the battery manufacturer’s safety
recommendations. Wear safety glasses.
You will need to take steps during the design and development of your end product to ensure
that its EMC performance complies with applicable regulations; suggestions are presented in
Appendix A.
The controller contains ESD-sensitive components. Use appropriate precautions in
connecting, disconnecting, and handling the controller.
WARNING
Bekijk gratis de handleiding van Curtis 1226BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1226BL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15971 MB |
