Curtis 1220E handleiding
Handleiding
Je bekijkt pagina 8 van 72
2 — INSTALLATION AND WIRING
Curtis Model 1220E – August 2022 Return to TOC
pg. 4
2 — INSTALLATION AND WIRING
MOUNTING THE CONTROLLER
e 1220E controller can be oriented in any position, but the mounting location should be carefully
chosen to keep the controller clean and dry. If a clean, dry mounting location cannot be found,
a cover must be used to shield the controller from water and contaminants.
e outline and mounting hole dimensions are shown in Figure 2. e controller should be mounted
by means of the two mounting holes at the opposing corners of the heatsink, using M4 (#8) screws.
Figure 2
Mounting dimensions, Curtis 1220E motor controller.
79.0
63.0
33.0 ±1.0
47.5 ±1.0
25.0
141.0
125.0
2X ø5.0
Dimensions in millimeters
Bekijk gratis de handleiding van Curtis 1220E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1220E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9449 MB |
