Curtis 1220E handleiding

72 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 72
2 — INSTALLATION AND WIRING
pg. 9
Return to TOC Curtis Model 1220E – August 2022
INPUT/OUTPUT SIGNAL SPECIFICATIONS
e electrical characteristics of the input/output signals wired to the J1, J2, and J3 connectors are
described below.
KSI (pin J3-5)
e keyswitch (KSI) must be connected to B+ via a switch. is pin feeds the internal power supply
and can be used for general on/o and for the power supply to the Fault Output pin.
Input current at Nominal Battery Voltage (50 – 200 mA) + Fault Output current
Digital Inputs (pins J2-1, J2-2, J3-3 and J3-4)
e digital inputs must be connected to B+ via a switch, or they can be driven by outputs from other
systems.
Input current at Nominal Battery Voltage. approx 0.2 – 0.7 mA (depending on nominal battery voltage)
Input lter R-C time constant max 5 ms
Max LOW threshold voltage 4.5 V
Min HIGH threshold voltage 6.5 V
De-bouncing time (in software) 10 – 25 ms
Analog Inputs (pins J3-2, J3-6, J3-9, J2-8 and J3-13
The analog inputs are used for analog input commands from any analog input device, e.g.,
potentiometer, Hall sensor.
Input resistance (to B- ground) 50 kΩ ± 10%
Input current (wheel in center position) max 100 μA ± 10%
Input lter R-C time constant max 5 ms
Voltage range 0 – 5.5 V
Minimum resolution 12 bit
Command Encoder Inputs
Encoder 1A, 1B (pins J3-6, J3-13)
ese inputs are used for the A and B signals of the Encoder Command input device.
Encoder 2A, 2B (pins J2-3, J2-4)
ese inputs are used for the A and B signals of the Redundant Encoder Command input device.
Input current (to Encoder Ground) 1.5 mA ± 20%
Input lter R-C time constant 1 μs
Max LOW threshold voltage 1 V
Min HIGH threshold voltage 4 V

Bekijk gratis de handleiding van Curtis 1220E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCurtis
Model1220E
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9449 MB