CRUX ACPBM-77X handleiding
Handleiding
Je bekijkt pagina 4 van 12
Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.072419
4 of 12
R
INTERFACING SOLUTIONS
ACPBM-77X
10. Connect both the gray LVDS con-
nector and other end of the LVDS10
cable to the ACPBM-77X module.
11. Remove the two screws bracing the
Headunit.
12. Remove the Headunit and unplug
the Quadlock connector.
13. Unplug the 2-pin ber opc cable
from the factory Quadlock connector.
14. If your vehicle doesn’t come with
an auxiliary audio input, you must get
an Auxiliary Input Interface kit (CRUX
AUX-BM4.
*if your vehicle has factory AUX, skip steps 14-16
15. Remove the 12-pin connector
(wire-side view) from the factory
Quadlock connector. Insert the pins
from the AUX-BM4 harness as follows:
White - Pin 2 / Red - Pin 7 / Black - Pin 8
16. Plug in the OBD coder in to the ve-
hicle’s OBD port to the factory system.
Once the module’s LED turns green,
you can remove the coder.
17. Plug in the 2-pin ber opc
connector previously removed from
the factory Quadlock connector to the
ACPBM-77X harness (Female side).
18. Plug the factory Quadlock connec-
tor in to the male side of the ACPBM-
77X harness.
2
7 8
Smart-Play Integration with Rear-View Camera Input for
E Series BMW with CCC Systems (6.5” or 8.8” Monitor) and 10-Pin LVDS Connector
Bekijk gratis de handleiding van CRUX ACPBM-77X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CRUX |
| Model | ACPBM-77X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8752 MB |
