Crestron ZUMMESH-JBOX-20A-PLUG handleiding
Handleiding
Je bekijkt pagina 19 van 34
Best Practices – DOC. 6689H Installation and Setup of Crestron RF Products • 15
Building a Channel Map
After completion of a site survey, the next step is to build a channel map by selecting the
channels for the networks. Use the channel map worksheet below to select the most
appropriate channels for the networks.
Channel Map Worksheet
CHANNEL NUMBERS
NETWORK
infiNET EX/ER
CHANNELS 2.4 GHz Wi-Fi CHANNELS
11 1
12
2
13
3
14
4
15
5
16 6
17
7
18
8
19
9
20
10
21 11
22
23
24
25
26
Entering a network into the NETWORK column of the channel map worksheet reserves the
associated channel for that device and ensures that two devices are not accidentally
communicating on the same channel. To build a channel map, refer to the guidelines below.
Channel Map Guidelines
Enter wireless networks into the channel map as follows:
1. Eliminate the channels that were found to have too much interference during the
site survey.
2. Enter the 802.11b/g-only networks.
3. Enter the 802.11a/b/g/n networks.
4. Enter the Extended Range networks.
5. Enter the infiNET EX networks. Note that infiNET EX networks are default to channel
15 first.
NOTE: If there is not enough free space to enter all networks on the channel map
worksheet (using the steps above) select, 802.11a channels for some or all 802.11a/b/g/n
networks, and then repeat steps 4 and 5.
Bekijk gratis de handleiding van Crestron ZUMMESH-JBOX-20A-PLUG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | ZUMMESH-JBOX-20A-PLUG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7948 MB |
