Crestron Green Light GLXX-2DIM8 handleiding

Niet gecategoriseerd

Crestron

24 pagina's

PDF beschikbaar

Handleiding

Crestron Green Light Express™ Dimming Panel

NET Port Wiring

When wiring the supplied NET connectors for connection to a Crestron control system or other device on the

Cresnet network, use Crestron certified wire such as CRESNET-NP or CRESNET-P. For instructions on

network wiring, refer to “Appendix C: Network Wiring” on page 21.

When daisy-chaining connections between NET ports, strip the ends of the wires carefully to avoid nicking the

conductors. Twist together the ends of the wires that share a pin on the network connector, insert the connection

into the Cresnet connector, tighten the retaining screw. Repeat the procedure for the other three conductors.

OVERRIDE Port Wiring

When a connection is applied between the override terminals, the modules will enter Override mode. The

Crestron GLS-PLS-120/277 phase-loss sensor or any device that provides a dry contact closure can be

connected to the supplied OVERRIDE connector on the bottom of the cabinet.

Installation Guide – DOC. 6889B Crestron Green Light Express™ Dimming Panel • 13

Bekijk gratis de handleiding van Crestron Green Light GLXX-2DIM8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.