Crestron Green Light GL-EXP-DIM-CN handleiding

Niet gecategoriseerd

Crestron

3 pagina's

PDF beschikbaar

Handleiding

GL-EXP-DIM-CN

Crestron Green Light

Dimmer Expansion Module, Cresnet

crestron.com

800.237.2041

> Single-channel lighting dimmer

> Crestron® system integration via Cresnet

> Supports dimmable LED, incandescent, magnetic low-voltage,

neon/cold cathode, and 2-wire fluorescent lighting loads

> Rated 16 Amps at 100-277 Volts AC

> Forward phase dimming

> Zero-cross filter technology for reduced lamp flicker

> Extreme stability under noisy power line conditions

> Built-in air gap relay

> Closure-activated override mode

> UL

924 listed for emergency lighting control

> Surface mountable NEMA Type 1 enclosure

> Mounts on a wall panel or above a suspended ceiling

> UL 2043 listed for installation in an environmental air

handling space

The Crestron Green Light

GL-EXP Series delivers a family of professional

lighting control modules for Cresnet

or DALI

based lighting systems.

Designed for easy installation on a wall or above a suspended ceiling,

these modules offer a perfect solution for adding extra lighting zones to

any system without requiring an additional lighting cabinet.

The GL-EXP-DIM-CN is a single-channel dimmer expansion module

designed to control LED, incandescent, magnetic low-voltage, neon/cold

cathode, or 2-wire dimmable fluorescent lighting loads. Utilizing proprietary

zero-cross filter technology, the GL-EXP-DIM-CN compensates for line

voltage and frequency fluctuations, providing superior immunity to power

line noise and a dramatic reduction in lamp flicker.

Forward Phase Dimming

The GL-EXP-DIM-CN employs forward phase (leading edge) dimming to

handle inductive load types like magnetic low-voltage and neon, as well

as incandescent, LED, and 2-wire fluorescent.

Cresnet

Communications

The GL-EXP-DIM-CN interfaces with a Crestron

control system via

Cresnet. Cresnet is a simple 4-wire network bus that provides the

communications backbone for a system of Crestron lighting dimmers,

switches, keypads, shades, thermostats, and other devices.

Emergency Lighting Control

The GL-EXP-DIM-CN is UL

924 listed for use in controlling an emergency

lighting load. In the event of a power failure, a contact closure from a

power loss sensor (Crestron GLS-PLS-120/277, sold separately) activates

the override mode in the GL-EXP-DIM-CN to turn on the lighting load if it

is off (assuming line power is supplied by a backup power source). The

override dimming level can be preset to any value when commissioning

the lighting system, so even if the load is already on prior to a power

failure, it will change to the preset level when override mode is activated.

Plenum Rated NEMA Enclosure

The GL-EXP-DIM-CN is designed to be mounted to a vertical surface

and is UL 2043 compliant to allow for installation in an environmental air-

handling space above a suspended ceiling. Conduit knockouts are provided

on the bottom and lower sides of the unit. All connections are made via

screw terminals behind the front cover.

SPECIFICATIONS

Load Control

Dimmer Channels: 1

Load Rating: 16 Amps

Line Voltage: 100-277 Volts AC, 50/60 Hz

Dimmable Load Types: LED, incandescent, neon/cold cathode, magnetic

low-voltage, 2-wire dimmable fluorescent

Communications

Cresnet: Cresnet slave mode

Connections

NEUT: (3) Captive screw terminals;

Neutral connections for feed and load;

24 to 10 AWG (0.25 to 4.0 mm

) wire size

Bekijk gratis de handleiding van Crestron Green Light GL-EXP-DIM-CN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.