Crestron DIN-GWDL handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 42
Product Manual Doc. 9096C DIN-GWDL and DIN-GWDL-SPLTR 11
Communications
DMX-C Supports discovery, auto-addressing and fixture data;
DMX-C communications with Crestron light fixtures and Crestron compatible
third-party light fixtures
Ethernet 100BASE-TX Ethernet;
Static IPor DHCP
Connections
LANPoE Class 2 (1) 8-pin RJ-45 connector, female;
100BASE-TX Ethernet port;
PoE (Power over Ethernet) PD (Powered Device)
9-48VDC (1) 3-pin 5.18 mm terminal block;
9 - 48VDC, 5 W max;
Use only when not powering the device using PoE
DMX 1-2 (2) 3-pin 5.18 mm terminal blocks;
Isolated DMX-C outputs;
One universe split between two ports;
Each output supports up to 32 directly connected devices
Wiring:
Use shielded CAT5 wire or better with a shielded connector, do not connect
drain to ground;
24 AWG minimum;
RJ-45 to 3-pin adapters included to make CAT5 STP connections;
Daisy chain all fixtures, do not create loops;
1,000 ft (305 m) maximum per output
Termination:
Terminate all daisy chain runs with the termination resistor included with the
fixtures;
Terminate the connection to a DIN-GWDL-SPLTR with the 120 Ω termination
resistor included with the DIN-GWDL-SPLTR between the + and - pins on the
terminal block that connects to DMX IN
INPUTS and OUTPUTS (1) 8-pin 5.18 mm terminal block, shared between INPUTS and OUTPUTS
INPUTS 1-2:
(2) inputs for contact closure, INPUT 1 contact controls Override mode and
INPUT 2 contact controls the lights when Override mode is on;
INPUT 1: When the contact is closed, Override mode is turned on. When the
contact is open, Override mode is turned off and the lights operate normally;
INPUT2: When the contact is closed, the lights turn off. When the contact is
open, the lights turn on
OUTPUTS 1-2:
(2) individually isolated (1KV) relay outputs (48V 250mA);
Repeats signal from corresponding INPUT 1 or 2;
Connect to additional DIN-GWDL INPUTS or other device override inputs
N/A Not used

Bekijk gratis de handleiding van Crestron DIN-GWDL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCrestron
ModelDIN-GWDL
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3024 MB