Crestron DIN-EN-2X18 handleiding
Handleiding
Je bekijkt pagina 7 van 26
DALI Lighting Design Guide
Doc. 7386H | crestron.com
3
• Readdressing Drivers: If a driver fails on a system, the loop can detect the missing address and
readdress it when a new driver is added back in its place.
• Warranty and Compliance: Crestron DALI drivers include a 5-year warranty. The drivers are UL
®
listed,
are CE marked, and follow the RoHS Compliant directive.
DALI Requirements
The intent of the DALI protocol is to supply low-cost, interchangeable drivers that are simple to program and
commission. DALI requirements are shown below:
• Driver Power Requirements: Drivers must provide universal voltage (115 to 300 V), 50 to 60 Hz,
high-power factor, low harmonics, and transient surge protection. When the initial voltage is applied, the
lamps go to full on or to a preset level.
• Command Requirements: Drivers are able to receive information and report this information back to the
central DALI system regarding lamp or driver failures.
• Lamp Response Requirements: DALI protocol requires a precise logarithmic dimming curve of 254 steps
(2.8 % increase per step) so that all drivers dim the same: 0 to 100% for incandescent and fluorescent,
3 to 100% for compact fluorescent, and 0 to 100% for LED.
• Protocol Requirements: The DALI protocol requirements include the intent and electrical requirements of
the protocol, bits and bytes requirements, collision detection, and the type of wire to be used for the DALI
system.
Bekijk gratis de handleiding van Crestron DIN-EN-2X18, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | DIN-EN-2X18 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6324 MB |
