Craftsman CMCPPR320 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 11 van 32

9

English

stone (not included), maintaining the angle of the

original cuttingedge of the cuttingblade.

6. Inspect the edge of the fixed blade and remove any burrs

with a fine toothfile.

7. Install sharpened cutting blade as described in the

Removing and InstallingBladesection.

Blade Lubrication (Fig. A)

1. After use, remove thebattery

16

.

2. Carefully apply a resin solvent to the exposedblades.

Storage (Fig. A)

1. After use, remove thebattery and install blade cover.

2. Keeping your hands away from the blade, and store in a

dry location, away from the reach ofchildren.

Accessories



WARNING: Since accessories, other than those

offered by CRAFTSMAN, have not been tested with

this product, use of such accessories with this product

could be hazardous. To reduce the risk of injury, only

CRAFTSMAN‑recommended accessories should be used

with thisproduct.

Recommended accessories for use with your product are

available at extra cost from your local dealer or authorized

service center. If you need assistance in locating any

accessory, please contact CRAFTSMAN. Call 1‑888‑331‑4569.

Cleaning



WARNING: Blo

w dirt and dust out of all air vents with

clean, dry air at least once a week. To minimize the risk

of eye injury, always wear ANSI Z87.1 approved eye

protection when perform

ing thisprocedure.



WARNING:

Never use solvents or other harsh chemicals

for cleaning the non‑metallic parts of the tool. These

chemicals may weaken the plastic materials used in

these parts. Use a cloth dampened only with water and

mild soap. Never let any liquid get inside the tool; never

immerse any part of the tool into aliquid.

MAINTENANCE



WARNING: To reduce the risk of serious personal

injury, turn unit off and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start‑up can causeinjury.

Your CRAFTSMAN power tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regularcleaning.

Versatrack™ (Fig. O)



WARNING: To reduce the risk of serious personal

injury, turn unit off and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start‑up can causeinjury.



WARNING: To reduce the risk of serious personal

injury, do not use a damaged Versatrack™ hang hook

or Versatrack™ Trackwall. A damaged Versatrack™

hang hook or Versatrack™ Trackwall will not support

the weight of thetool.



WARNING: To reduce the risk of serious personal

injury, DO NOT suspend tool overhead or suspend

objects from the hang hook. ONLY suspend tool on the

Versatrack™ Trackwall using the hanghook.



WARNING: Ensure that the tool weight does not

exceed the maximum rated weight of 20lb (9kg) for

the selected Versatrack™hook.



WARNING: When hanging objects on a Versatrack™

Trackwall rail, adequately space the tools in order to

not exceed 75lb (35 kg) per linearfoot.

iMPORTAnT: Versatrack™ accessories mount compatible

tools securely to the Versatrack™ Trackwallsystem.

1. Turn the tool off, remove the battery pack

and accessories.



CAUTION: Any product with exposed cutting teeth

must have them covered securely if it is to be on

theVersatrack™Trackwall.

2. Flip or pull open the integral hang hook

15

. It clicks

when locked intoposition.

3. Mount the integral hang hook to the

Versatrack™Trackwall.

nOTE: Versatrack™ accessories for use with your tool are

available at extra cost from your local dealer or authorized

service center. If you need assistance in locating any

accessory, please contact CRAFTSMAN, call 1‑888‑331‑4569.

Repairs

The charger and batteries are notserviceable. There are no

serviceable parts inside the charger or batterypack.



WARNING: To assure product SAFETY and RELIABILITY,

repairs, maintenance and adjustment (including

brush inspection and replacement, when applicable)

should be performed by a factory service center or

an authorized service center. Always use identical

replacementparts.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Craftsman CMCPPR320, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Craftsman (Niet gecategoriseerd)

Handleiding bekijken

Craftsman CMCSS800

Niet gecategoriseerd - handleiding

Handleiding bekijken

Craftsman CMCL050

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd