Cooking Performance Group 351COHD4M handleiding

Oven

Cooking Performance Group

14 pagina's

PDF beschikbaar

Handleiding

www.cookingperformancegroup.com

User Manual

Internal Cleaning

Allow the oven to cool completely. To use the ‘cool down’ program for digital models, see below:

• Press ‘ ’ and using the MINUS button, go below the minimum temperature value and select “C00".

• Press ‘Start’ and the temperature will start to ash in the display, and then you will see the temperature

start to decrease.

• To expediate the cooling process, open the door of the oven.

Once the unit is cool, remove stainless steel bafe, wire shelves, and support racks. These parts are

dishwasher safe. Clean any buildup of grease from the oven interior using a mild detergent, a hot water

solution, and a soft bristle brush. We recommend Noble Chemical Sunbright for daily cleaning, and Noble

Chemical Knockout, or Blast, for deep clean or carbon build up. Dry the oven thoroughly with a soft, dry cloth.

Then reinstall steel bafe, wire shelves, and support racks.

External Cleaning

Clean any buildup of grease on the exterior of the oven using a mild detergent, a hot water solution, and

a soft bristle brush. We recommend Noble Chemical Sunbright for daily cleaning. We recommend using

Noble Chemical Excel to polish external stainless steel surfaces, as well as Noble Chemical Kleer View to

clean the door glass.

NOTE: Remember to replace and/or clean the cooling lter located at the back of the unit. Disconnect

from the electrical connection. Then loosen the grid screws and replace the lter. Reinstall and place

everything back in its original location.

Door Cleaning

Strictly adhere to the following procedure in order to avoid electrocution or

injury: To clean the inner glass of the door, start a rapid cooling cycle of the oven

chamber (for digital models) or wait until the ambient temperature is reached (for

mechanical models).

• This procedure should be performed with the door ajar (inclined about 30°).

• Remove the two external screws “A” as shown in the gure, unscrewing

counterclockwise.

• Pull out the sheet metal prole “B” carefully.

• Remove the inner glass very gently.

• Place the glass on a suitable surface, such as a soft cloth.

• Clean the surface using a soft cloth just moistened with a neutral product, specic for glass,

following the instructions of the manufacturer of the detergent

Bekijk gratis de handleiding van Cooking Performance Group 351COHD4M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.