Continental 1RE-N-HD handleiding
Handleiding
Je bekijkt pagina 5 van 44
5
OPERATIONS MANUAL
REACH-INS & ROLL-INS
For optimum performance, all models should be installed on
casters or legs (see “Installing Casters” or Installing Legs”)
with a minimum 12” above the grill and 3” on each side and
back of cabinet (see Figure 3). This spacing will provide suf-
ficient room for proper air circulation and clearance to access
components for cleaning and maintenance. If any of the these
conditions can not be met, the installer should provide special
venting or air ducts.
IMPORTANT NOTE: To assure maximum operating effi-
ciency, your new cabinet should be located where an
unrestricted air supply can circulate above and behind the
cabinet. Do not at any time obstruct the grill area in the
front of the cabinet in any way, and never place or store
anything on top of the cabinet machine compartment.
These rules are essential for maximum cooling capacity
and long life of refrigeration parts.
INSTALLATION AND LOCATION
Before moving the cabinet to its final point of installation, mea-
sure all doorways or passages to assure clearance. If additional
clearance is needed, you can remove the cabinet doors and grill
(see “Door Removal and Adjustment” and “Grill Removal”).
VENTILATION
The final location site of your air cooled refrigerator or freezer
must provide a large quantity of cool, clean air. All refrigeration
systems operate most efficiently and trouble-free with cool,
dry air circulation. Avoid locations near heat and moisture
generating equipment including ovens, cooking ranges, fryers,
dishwashers, steam kettles, etc., or in direct sunlight (where
temperatures can exceed 100°F). Do not select a location in an
unheated room or area where temperatures may drop below
55°F. Air supply to the condensing unit is equally important.
Restricting the air places an excessive heat load on the con-
densing unit and adversely affects its operation.
FIGURE 2B: Roll-In or Roll-Thru Refrigerator or Freezer
ROLL-IN COMPONENTS
GUARD
AIR DUCT
COMPRESSOR
(CONTAINS COIL AND FANS)
HINGE
CONDENSER
EVAPORATOR HOUSING
CONTROL BOX
UPPER
END PANEL
GRILL
CART
THERMOMETER
DIGITAL
LOCK KEEPER
GASKET
RAMP
DOOR
ANTI-CONDENSATE
SWITCH
WIPER
(ON GASKET)
BREAKER STRIP
(RETAINS ANTI-SWEAT
CONDENSATE HEATERS)
FIGURE 2C: Reach-In or Pass-Thru Warmer
BLOWER HOUSING
GRILL
AIR DUCT
HIGH-TEMP
GASKET
HEAVY DUTY
PILASTER STRIP
S/S BREAKER COVER
DOOR
UPPER END
PANEL
THERMOMETER
RE-HINGE
PROVISIONS
LOCK
KEEPER
HEATER COVER
SHELF
TEMPERATURE
CONTROL KNOB
ADJUSTABLE
LEG
WARMER COMPONENTS
(OVER BREAKERSTRIP)
(TYPICAL ON 1-SECTION,
LONG DOOR REACH-IN)
Bekijk gratis de handleiding van Continental 1RE-N-HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Continental |
| Model | 1RE-N-HD |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 9584 MB |
