Compex Tens handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244/ 244

Afdrukken

Je bekijkt pagina 12 van 244

12

GUIDANCE AND MANUFACTURE’S DECLARATION – ELECTROMAGNETIC IMMUNITY

The device is intended for use in the electromagnetic environment specied below. The customer or the user of the device should

assure that it is used in such an environment.

Immunity test IEC 60601 test level Compliance level Electromagnetic environment - guidance

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 Vrms

150 kHz to 80 MHz

3 V RMS outside the

ISM band, 6 V RMS in

the ISM and amateur

bands

10 V/m

80 MHz ¨C 2,7 GHz 80

% AM at 1 kHz

3 Vrms

150 kHz to 80 MHz

3 V RMS outside

the ISM band, 6 V

RMS in the ISM and

amateur bands

10 V/m

80 MHz ¨C 2,7 GHz

80 % AM at 1 kHz

Portable and mobile RF communications equipment should

not be used near any part of the device, including cables, than

the recommended separation distance calculated from the

equation applicable to the frequency of the transmitter.

Recommended separation distance

d = 1,2 P

d = 1,2 P 80 MHz to 800 MHz

d = 2,3 P 80 MHz to 2,5 GHz

Where P is the maximum output power rating of the

transmitter in watts (W) according to the transmitter

manufacturer and d is the recommended separation distance

in metres (m).

Field strengths from xed RF transmitters, as determined by

an electromagnetic site survey, a) should be less than the

compliance level in each frequency range. b)

Interference may occur in the vicinity of equipment marked

with the following symbol:

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is aected by absorption and reection from

structures, objects and people.

a Field strengths from xed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios,

amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the

electromagnetic environment due to xed RF transmitters, an electromagnetic site survey should be considered. If the measured eld

strength in the location in which the device is used exceeds the applicable RF compliance level.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244/ 244

Bekijk gratis de handleiding van Compex Tens, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd