ColorKey Creator Spot 250 handleiding
Handleiding
Je bekijkt pagina 19 van 26
19
Creator Spot 250
Stand Alone Settings
To use your Creator Spot 250 without a DMX Controller, use one of the various
standalone modes below.
*Note: Standalone operation (ex: Auto or Sound Active) may cause the fixture to transmit DMX data.
To prevent interference with other fixtures, do not connect it to a DMX network unless part of a
proper Master/Slave configuration. *
Automatic Programs
To run the Creator Spot 250 in Automatic Mode, follow the instructions below:
1. Press (Menu)
2. Double press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Press (OK) to select “Run Mode”
5. Use (Up or Down) to scroll to “Auto”
6. Press (OK) to make selection
Sound Active Mode
To run the Creator Spot 250 in sound-active mode, do the following:
1. Press (Menu)
2. Double press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Press (OK) to select “Run Mode”
5. Use (Up or Down) to scroll to “Sound”
6. Press (OK) to make selection
Sound Sensitivity
To set the Sound Active sensitivity on the Creator Spot 250, follow the instructions
below:
1. Press (Menu)
2. Double press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Use (Up or Down) to select “Sound Regulator”
5. Press (OK) to make selection
6. Use (Up or Down) to select Sound Sensitivity (-006 to +006)
7. Press (OK) to make selection
8. Press (Menu) to return to menu
Bekijk gratis de handleiding van ColorKey Creator Spot 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ColorKey |
| Model | Creator Spot 250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5845 MB |
