CME WIDI Jack handleiding
Handleiding
Je bekijkt pagina 6 van 20
6 / 20
The slide switch on the back of the WIDI Jack can be used to switch
the input / output polarity of the mini TRS jack to adapt to the two
different TRS to 5-pin DIN MIDI cable specifications. Namely Type-A
or Type-B (the optional TRS to 5-pin DIN cable from CME is Type-
B). With this switch feature WIDI Jack can be applied to most TRS
MIDI specifications in the market.
Note 1: To determine whether your MIDI device is Type-A or Type-B, please
check the manual of your MIDI device or consult the manufacturer.
Note 2: If you find that MIDI messages CANNOT be sent or received between
the WIDI Jack and the connected MIDI device, try changing this switch to a
mode that matches the polarity of the TRS to 5-pin DIN MIDI cable.
There is a magnet inside the back of the WIDI jack, which can be
easily attached to the device with the magnet patch accessory.
Note: Do not place this product close to devices that are susceptible to
magnetic interference, such as credit cards, medical equipment, computer
hard drives, etc.
⚫ WIDI Jack Cable Options
Model
Description
Image
25DIN5
2.5mm mini TRS Jack to
5-pin DIN male cable (Type-B)
25TRS35
2.5mm mini TRS Jack to
3.5mm (1/8”) TRS Jack cable
Bekijk gratis de handleiding van CME WIDI Jack, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CME |
| Model | WIDI Jack |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1386 MB |
