CME WIDI Jack handleiding
Handleiding
Je bekijkt pagina 5 van 20
5 / 20
The socket marked with USB-C connects a standard 5 volts USB
power source (for example: charger, power bank, computer USB
socket, etc.). Therewith it supplies power to the WIDI Jack. This is
only necessary if the MIDI OUT socket of the MIDI device does not
supply power or when the WIDI Jack is only connected to MIDI IN
where MIDI power is not available.
The push switch on the right side of the interface is used for the
following quick operations (please confirm that the product firmware
has been upgraded to the latest version). The following operations
are based on Bluetooth firmware v0.1.0.0 or higher:
- When the WIDI Jack is NOT powered on, press and hold the
button. Power on the WIDI Jack until the green LED light
flashes slowly for 3 times. Then release the button. The
interface will manually reset to the factory default.
- When the WIDI Jack is powered on, press and hold the button
for 3 seconds and then release it. The interface will be
manually set to “force peripheral” mode. If the WIDI Jack was
connected to other BLE MIDI devices, this connection will be
terminated by following this procedure.
Bekijk gratis de handleiding van CME WIDI Jack, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CME |
| Model | WIDI Jack |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1386 MB |
