Cleanmaxx 16382 handleiding
Handleiding
Je bekijkt pagina 15 van 20
EN
15
they must be replaced by the manufacturer, customer service de-
partment or a specialist workshop in order to avoid any hazards.
WARNING – Danger of
Electric Shock
■ Never immerse the motor unit and the
connecting cable in water or other
liquids and ensure that they cannot fall
into water or become wet.
■ If the motor unit falls into water while it
is connected to the mains power, switch
off the power supply immediately! Only
after this should you pull the motor
unit from the water.
■ Never touch the motor unit and the
connecting cable with wet hands when
they are connected to the mains power.
■ The device is not to be used if it has
been dropped or if it is leaking.
■ Keep the device out of the reach of
children when it is energised.
WARNING – Danger of Fire!
■ Do not cover the device during opera-
tion in order to prevent it from catching
fire. Do not insert anything into the ven-
tilation openings of the device and make
sure that they do not become clogged.
NOTICE – Risk of Damage to
Material and Property
■ The liquid or steam must not be directed
towards equipment containing electri-
cal components, such as the interior of
ovens.
■ Only connect the mains plug to a plug
socket that matches the technical data
of the device.
■ Only use suitable extension cables (max.
3m) whose technical data is the same
as that of the device.
■ Do not use the device if there is visible
damage to the device or to the compo-
nent parts of the device.
■ In the event of damage / faults, switch
the device off immediately.
■ The device should only be used if it has
been fully and correctly assembled! The
tanks must be inserted and must
not be damaged! If dirt were to get
inside the motor unit, this could damage
the motor.
■ Do not exceed the maximum capacity
of the tanks!
■ Make sure that the device does not tip
over so that no water can run out of the
tanks.
ATTACHING AND
DETACHING ACCESSORIES
Spraying Handle Holder
The spraying handle holder(11) must be
attached to the device before it is first used:
1. Slide the spraying handle holder from
above into the fixture on the front of the
device (PictureB).
2. Wind the suction hose clockwise around
the device so that the spraying handle
(12) can be placed in it.
Dirty/ Fresh Water Tank
• Removing: Use the lid handle to pull
the tank(10, 17) vertically upwards
away out of the motor unit(PictureC).
• Opening: To open, lift up the closure tab
on the lid(9, 18) and take off the lid.
• Closing: Make sure that the locking lugs
of the lid engage in the recesses on the
water tank and the closure tab clicks
into place.
• Inserting: Place the tanks vertically into
the motor unit.
Bekijk gratis de handleiding van Cleanmaxx 16382, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleanmaxx |
| Model | 16382 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 1730 MB |
