Cleanmaxx 15059 handleiding
Handleiding
Je bekijkt pagina 16 van 20
EN
16
USE
Please Note!
■ Ensure that there are no larger, sharp
objects on the surface which is to be
cleaned.
■ The device should only be used if it has
been fully and correctly assembled! The
filter must be completely dry, insert-
ed and must not be damaged! If dirt
were to get inside the motor unit, this
could damage the motor.
■ Empty the dust container regularly and
clean it after every use. Also clean the
filter regularly in order to prevent over-
loading of the motor.
■ Switch off the device after each surface
has been cleaned as this will considera-
bly increase the operating time on each
battery charge.
L
The device cannot be operated
when it is connected to the mains
power.
The floor nozzle can only be fixed
in the suction opening(
15
) with the
extension tube(
2
).
The crevice nozzle can only be fixed
directly in the suction opening (
15
)
of the device.
• Switch on: Press the On / Off button(12):
○ Press once: low suction level
○ Press twice: high suction level
•
Switch off:
Press the On / Off button
once or twice again.
• To ensure optimum performance of the
device, empty and if necessary clean the
dust container after every use (see the
“Cleaning the Device” chapter).
CLEANING THE DEVICE
Please Note!
■ Do not use any sharp or abrasive cleaning
agents for cleaning. They may damage
the surfaces.
L
The EPA filter may lose some of its
colour over time. This is normal and
does not have any adverse effect on
function.
• Accessories: Remove from the device.
Regularly remove hair and fluff. Wipe
with a damp cloth if necessary.
• Turn the dust container (
4
) anti-clockwise
and remove it from the motor unit (
6
).
Then pull the filter (
5
) out of the dust
container (
PictureC
)
.
• Dust container: Empty, then clean with
a soft brush. If necessary, wipe with a
damp cloth and dry or leave to air dry.
• Filter:
Tap out and clean with a soft
brush if necessary. The filter can also be
rinsed out with clear water, but must
be completely dry before they are
assembled!
• Motor unit:
Clean with a damp cloth if
necessary. Then wipe it dry.
• Once all the components are dry, reas-
semble them in reverse order.
Never
assemble wet or damp components!
15059_DE-EN_A5_V1.1.indb 1615059_DE-EN_A5_V1.1.indb 16 21.08.2024 12:49:3621.08.2024 12:49:36
Bekijk gratis de handleiding van Cleanmaxx 15059, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleanmaxx |
| Model | 15059 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2438 MB |
