Cleanmaxx 15059 handleiding
Handleiding
Je bekijkt pagina 15 van 20
EN
15
NOTICE – Risk of Damage to
Material and Property
■ Only connect the mains adapter to a
plug socket that matches its technical
data. The plug socket must be readily
accessible after connection so that the
connection to the mains can quickly be
isolated.
■ Only use suitable extension cables (max.
3m) whose technical data is the same as
that of the device.
■ Disconnect the device from the power
source before a thunderstorm or if a
fault occurs during charging.
■ Use only original accessories from the
manufacturer in order to guarantee that
there is no interference that may prevent
the device from working and to avoid
possible damage.
CHARGING UP THE
BATTERY
Please Note!
■
Charge up the battery fully before
you first use the device in order
to achieve the maximum charging
capacity.
1. Plug the barrel connector of the
connecting cable
(
3
) into the charging
socket
(
11
).
2. Connect the power supply to a plug
socket. The charge control lamps(
10
)
start to flash and the battery is charging.
If all charge control lamps are constantly
lit, the battery is fully charged.
3. Disconnect the charger cable from the
power source and then from the charg-
ing socket.
L
To prevent a deep discharge of the
battery, charge it up every 3 months
if it is not used for a prolonged
period.
WALL MOUNTING
BRACKET
Please Note!
■ Use the fixings which are also supplied
to hang up the wall mounting bracket.
If you are unsure whether the fixings
supplied are suitable for the wall, seek
advice from a specialist retailer.
■ Hang the wall mounting bracket in ase-
cure and fixed position.
■ Before drilling, ensure that there are
no pipes or power cables behind the
intended drilling point.
The device can be stored in the wall mount-
ing bracket(8) and charged up there for its
next use.
L
Ideally attach the wall mounting
bracket near to an easily accessible
plug socket so that the device can
be charged.
Screwing On the Wall Mounting
Bracket
1. Place the wall mounting bracket straight
against the wall and mark out three drill
holes.
2. Drill holes into the wall and place
anchors in them.
3. Screw on the wall mounting bracket.
15059_DE-EN_A5_V1.1.indb 1515059_DE-EN_A5_V1.1.indb 15 21.08.2024 12:49:3621.08.2024 12:49:36
Bekijk gratis de handleiding van Cleanmaxx 15059, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleanmaxx |
| Model | 15059 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2438 MB |
