Clean Air Optima CA-510 Pro Smart Handleiding (224 Pagina's)

Handleiding

/ 224

Je bekijkt pagina 25 van 224

25

Maintenance

Cleaning the outside of the air puriﬁer

1. Switch o the device and pull the plug.

2. Use a soft and humid piece of cloth to clean the device from dust and dirt.

3. Make sure that no water gets into the device.

Cleaning of the Intelligent Particle Sensor™

Clean the air quality sensor every 6 to 8 weeks.

When the value of PM 2.5 is displayed incorrectly, a cotton swab can be used to clean

thesensor lens.

1. Remove the cover of sensor.

2. Clean the sensor lens with a cotton swab and water as indicated by the arrow.

Thendrythelens with a clean cotton swab.

3. Install the cover of sensor.

4. Do not wipe the sensor lens with alcohol or other organic solvent.

Attention! If the humidity in the room is very high, there is a risk of condensation on the air quality

sensor. This may cause the air quality indicator (Digital Display - Particle Measurement) toindicate

that the air quality is poor, while this should not be the case. In this case, werecommend that

you clean the air quality sensor or do not use the air puriﬁer in automatic mode.

/ 224

Bekijk gratis de handleiding van Clean Air Optima CA-510 Pro Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.