Clean Air Optima CA-403 Smart Handleiding (123 Pagina's)

Handleiding

5

Remote control

1. Open the battery cover at the back side of remote control to place the battery, (see Picture 1).

2. To place the battery: there is a “security tab” at the bottom of the remote control that you ﬁrst have to

slide to the right and then pull out the battery holder, (see Picture 1).

Insert the battery with the correct polarity, (see Picture 2).

3. Push the battery cover back into the remote control.

Remote control Battery cover (CR2032)

(Picture 1) (Picture 2)

Features

1. Touch control buttons

2. 12 speeds

3. Powerful airstream of 7,2 m/s

4. Fan air ﬂow rate up to 1375m3/h

5. Oscillation function, automatic swing in horizontal direction up to 70°, automatic swing in vertical

direction up to 85°

6. Timer: 1 -8Hours

7. Sleep air ﬂow mode

8. Remote control

9. WIFI function

Control panel / Operation instruction

Note: When you plug in the fan for the ﬁst time, a ‘‘BiBi’’ sound alert means that the fan is correctly

connected.

ON/ OFF (Power)

Press the Power Button to activate the device.

Press the Power Button again, the device turns o.

The display only shows the temperature when the device is turned o.

Bekijk gratis de handleiding van Clean Air Optima CA-403 Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.