Cigweld BlueVenom 4R-Rover handleiding
Handleiding
Je bekijkt pagina 19 van 72
SECTION 5:
MIG (GMAW) WELDING
3.01 ENVIRONMENT
These units are designed for use in environments with
increased hazard of electric shock.
A. Examples of environments with increased hazard of
electric shock are:
1. In locations in which freedom of movement is
restricted, so that the operator is forced to perform
the work in a cramped (kneeling, sitting or lying)
position with physical contact with conductive parts.
2. In locations which are fully or partially limited by
conductive elements, and in which there is a high risk
of unavoidable or accidental contact by the operator.
B. Environments with increased hazard of electric shock do
not include places where electrically conductive parts
in the near vicinity of the operator, which can cause
increased hazard, have been insulated.
3.02 LOCATION
Be sure to locate the welder according to the
following guidelines:
A. In areas, free from moisture and dust.
B. Ambient temperature between -10° C to 40° C.
C. In areas, free from oil, steam and corrosive gases.
D. In areas, not subjected to abnormal vibration or shock.
E. In areas, not exposed to direct sunlight or rain.
F. Place at a distance of 300mm or more from walls or
similar that could restrict natural air ow for cooling.
3.03 VENTILATION
Since the inhalation of welding fumes can be harmful, ensure
that the welding area is effectively ventilated.
SECTION 3:
INSTALLATION
CIGWELD.COM.AU | 19
OPERATING MANUAL BLUEVENOM 4R-ROVER
CIGWELD.COM.AU | 19
Bekijk gratis de handleiding van Cigweld BlueVenom 4R-Rover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cigweld |
| Model | BlueVenom 4R-Rover |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11536 MB |
