Handleiding
Je bekijkt pagina 5 van 11
Note：Figure 1, Figure 2 only as a product space demand size schematic diagram.
Leveling the Fridge
If the Fridge is not level, the door and magnetic seal alignment will be affected and may cause you Fridge to work
incorrectly. Once the Fridge is placed in its final location, adjust the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the Fridge with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp
sponge or cloth. Wash the baskets and shelves in warm soapy water and dry completely before replacing in the Fridge.
The external parts of the Fridge can be cleaned with wax polish.
Before plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the Fridge.
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes before switching back on
to allow the coolant fluid to settle.
Before filling your Fridge
Before storing foods in your Fridge, turn the Fridge on and wait for 24 hours, to make sure it is working properly and to
allow the Fridge to fail to the correct temperature.
START
Testing
Clean the parts of the refrigerator with lukewarm water containing a little neutral detergent and with clear water, and wipe
them dry.
Notes: Electric parts of the refrigerator can only be wiped by dry cloth.
1. Remark: turn the thermostat knob to the "4" position, turn on electricity. The compressor begin to work.
2. Open the door 30 minutes later, if the temperature in the refrigerator decreased obviously, it shows that the refrigerator
system works well. When the refrigerator operates for a period of time, the temperature controller will automatically set the
temperature within limits it opens.
Temperature Control Dial
Temperature Control
The temperature of the appliance can be adjusted by turning the thermostat dial.
The thermostat can be set between 1 and 7.
• 1 is the warmest setting.
• 7 is the coldest setting.
• Set the dial to OFF to turn off the cooling function.
Under the normal operating condition (in spring and autumn), it is recommended to set the temperature at 4.
In summer when the ambient temperature is high, it is recommended to set temperature at 3-4. so as to guarantee
the fridge and freezer temperatures and reduce the refrigerator continuous running time; and in winter when the
ambient temperature is low, it is recommended to set temperature at 5-6 to avoid frequent start/stop of the
refrigerator.
Notes:The temperatures may vary with respect to setting’s ones due to compressor cycles and outside conditions.
STORAGE OF FOOD
1.How to Use the Refrigerator Compartment
*The cook dishes can be put into refrigerator to keep fresh after their temperature decreases to room temperature.
*Egg pockets and bottle pockets for eggs, butter, milk and bottle drinks,etc..
2.Placement of Food
*Proper place should be left instead of too crowded during food storage.
*Food to be stored should be wrapped with clean plastic film or fresh keeping paper, then distributed to several frames
even to avoid contamination and the loss of water and smell mixture.
Bekijk gratis de handleiding van Chiq CSR046DW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chiq |
| Model | CSR046DW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1522 MB |
