Chauvet Freedom Flex Stick Battery handleiding

Niet gecategoriseerd

Chauvet

31 pagina's

PDF beschikbaar

Handleiding

Operation

Freedom Flex Stick X4 and Freedom Flex Stick Battery User

Master/Slave Mode

The Master/Slave mode allows a single Freedom Flex Stick X4 and Freedom Flex Stick Battery product

(the “master”) to control the actions of one or more Freedom Flex Stick X4 and Freedom Flex Stick Battery

products (the “slaves”) without the need of a DMX controller. The master product will be set to operate in

standalone mode or with the RF control, while the slave products will be set to operate in slave mode.

Once set and connected, the slave products will operate in unison with the master product.

Configure the products as indicated below.

Slave products:

1. Press <MENU>.

2. Use <UP> or <DOWN> to select Run Mode.

3. Press <ENTER>.

4. Use <UP> or <DOWN> to select Slave.

5. Press <ENTER>.

6. Use <UP> or <DOWN> to select from Slave1, Slave2, Slave3, or Slave4.

•Select Slave1 for 100% synchronized actions.

•Select Slave2, Slave3, and/or Slave4 for delayed actions, creating a wave effect.

7. Press <ENTER>.

8. Connect the DMX input of the first slave product to the DMX output of the master product.

9. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave

product.

10. Finish setting and connecting all the slave products.

Master product:

1. Set the master product to operate in standalone mode or with RF control.

2. Make the master product the first product in the DMX daisy chain.

Slave products:

1. Press <MENU> repeatedly until DFI shows on the display. Press <ENTER>.

2. Use <UP> or <DOWN> to select DFI Mode. Press <ENTER>.

3. Use <UP> or <DOWN> to select RX. Press <ENTER>.

4. Press

<MENU> repeatedly until Slave Setting shows on the display. Press <ENTER>.

5. Use <UP> or <DOWN> to select the slave unit(s), from Slave1–4. Press <ENTER>.

6. Set the DMX address to 001.

7. Set the D-Fi to receive a specific channel, 01–16.

8. Finish setting and connecting all the slave products.

Master product:

1. Set the master product to operate in standalone mode.

2. Set the D-Fi to transmit on the D-Fi channel the slaves are receiving on.

• Configure all the slave products before connecting the master to the daisy chain.

• Never connect a DMX controller to a DMX string configured for Master/Slave operation

because the controller may interfere with the signals from the master.

• Do not connect more than 31 slaves to the master.

• For more information on how to activate the built-in D-Fi of the

Freedom Flex Stick X4 and Freedom Flex Stick Battery, see D-Fi Setting

• All products must be set to the same DMX personality, DMX address, and D-Fi channel.

• Configure all the slave products before configuring the master to transmit.

• Never connect a DMX controller to a D-Fi channel configured for Master/Slave

operation because the controller may interfere with the signals from the master.

Bekijk gratis de handleiding van Chauvet Freedom Flex Stick Battery, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.