Chauvet Amhaze Stadium 2X IP handleiding
Handleiding
Je bekijkt pagina 8 van 15
5
Setup
Amhaze Stadium 2X IP User Manual Rev. 2
3. Setup
AC Power
The Amhaze Stadium 2X IP has a fixed power supply that works with an input voltage of either 120 VAC,
60 Hz or 230 VAC, 50 Hz, depending on the specific model.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
AC Plug
The Amhaze Stadium 2X IP comes with a power input cable terminated with a Seetronic IP65 Powerkon
connector on one end and an Edison plug on the other end (U.S. market). If the power cable which came
with the product has no plug, or if it is necessary to change the plug, use the table below to wire a plug..
Fuse Replacement
1. Disconnect this product from the power outlet.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating (8A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Amhaze Stadium 2X IP can be linked to a DMX controller using a 5-pin DMX connection. If using other
DMX-compatible products with this product, it’s possible to control each individually with a single DMX
controller.
DMX Personalities
The Amhaze Stadium 2X IP uses a 5-pin DMX data connection for its 2Ch DMX personality.
•The DMX Channel Assignments and Values
section provides detailed information regarding the
DMX personality.
Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Amhaze Stadium 2X IP supports RDM
protocol that allows feedback to make changes to menu map options.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Ensure the
product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
For information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website: www.chauvetprofessional.com
.
Bekijk gratis de handleiding van Chauvet Amhaze Stadium 2X IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chauvet |
| Model | Amhaze Stadium 2X IP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1702 MB |
