Chapin 63950 handleiding
Handleiding
Je bekijkt pagina 5 van 44
4E
Pressure
Cylinder
Chapin Backpack Sprayer Operator’s Manual - English
FILLING SPRAYER TANK
Make sure the filter basket is in place to keep debris from entering the tank.
Fill sprayer tank with water.
FILLING CHEMICAL TANK
Push chemical tank up (figure 1), then pull out (figure 2).
Place chemical tank on a flat surface and fill with desired
amount of chemical.
Always follow the
Chemical manufacturer’s instructions.
Snap chemical tank back onto sprayer.
Figure 2
Figure 1
Stage 3
(removable
Shut-off filter)
Figure 2 Stage 2 (removable In-tank filter)
Guide edge facing away
from pressure cylinder
Guide edge on
pressure cylinder
Stage 1
(Filter basket)
3 STAGE FILTERING SYSTEM
This backpack sprayer is equipped with a 3 stage filtering system (see
figure 1). Stage 1 is a filter basket incorporated into the tank opening
where fluid is added. Stage 2 filter is located at the inlet of the pressure
cylinder. Stage 2 is a removable In-Tank filter. Stage 3 is a removable filter
incorporated into the shut-off assembly. Periodic cleaning of these filters
is recommended to insure consistent fluid flow through the sprayer. This
will also reduce sprayer component wear.
The stage 3 filter is a removable filter incorporated into the inlet side of
the shut-off valve (see section “disassembling and repairing the shut-off
valve”). Make sure pressure is released before detaching the hose from
the shut-off. It is best to have no or minimal fluid in the pressure cylinder
before removing and reinstalling the stage 3 shut-off filter as fluid can
leak from the hose.
Stage 2
(Removable
In-Tank Filter
Figure 1
Bekijk gratis de handleiding van Chapin 63950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chapin |
| Model | 63950 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9533 MB |
