ChamSys MagicQ Software handleiding
Handleiding
Je bekijkt pagina 29 van 736
drivers can be manually updated using the steps below.
Note that the drivers for MagicQ Wings and MagicQ DMX interfaces are not applicable to
MagicDMX Basic or MagicDMX Full. Do not attempt to install drivers for MagicDMX.
GeNetix nodes
The GeNetix GN2, GN5 and GN10 have optional USB connection, enabling them either to be
used in USB or Network mode.
When a GeNetix node is connected via USB to a PC (Windows, Mac or Linux) with MagicQ
running then the GeNetix node runs in USB mode as a MagicQ interface connected directly to
the MagicQ application.
In USB mode it is treated just like a MagicQ Wing or Interface with the configuration being
controlled from within MagicQ rather than from within the GeNetix node. In this mode the
node configuration is unused, although it is retained for when the node is used again in
Network mode.
When in USB mode, the DMX outputs are configured in MagicQ from the Setup Window,
VIEW DMX I/O. For GN5 and GN10 the MIDI, Timecode and 10Scene port are configured in
MagicQ from the Setup Window, VIEW SETTINGS. The configuration is stored in the MagicQ
show file as normal.
The node indicates USB mode on its front panel when in USB mode.
The node continues in USB mode even if the USB link is lost or MagicQ is stopped. To restart
the node in Network mode, disconnect the USB or shut down the MagicQ and then power the
GeNetix node on and off.
Note that the GN2 can run in network mode but still be powered from USB - provided that it is
not connected to a PC running MagicQ – if MagicQ is detected it will be switched to USB mode.
MagicQ on Windows
MagicQ supports Windows 8, Windows 10 and Windows 11.
MagicQ Connect products do not need any drivers installed.
MagicDMX devices do not need any drivers - see MagicDMX.
MagicQ runs on all types of Windows PC including both Intel and ARM based Microsoft
Surface.
Drivers for older MagicQ products
The drivers for older MagicQ products are included in the MagicQ download.
C:\Program Files (x86)\ChamSys Ltd\MagicQ\MagicQ Wing Drivers
2025-02-12 ChamSys Manuals 13
Bekijk gratis de handleiding van ChamSys MagicQ Software, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ChamSys |
| Model | MagicQ Software |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 89674 MB |
