Champion DH3000 handleiding
Handleiding
Je bekijkt pagina 15 van 79
INSTALLATIONINSTALLATION
CONVERTING STRAIGHT-THROUGH OPERATION
TO CORNER OPERATION (CONT.)
1. Remove the rack guide (A); save the fasteners. Move (A) and
re-attach as shown (see Fig. 7).
2. Slide a dish rack through the machine to check the guide to
dish rack clearance. The dish rack should move smoothly
without binding or tipping on the guides.
3. Disconnect the door-lift bracket (B) connecting the front door
and the wall-side door and discard. To seal the holes, re-install
the bolts and lockwashers that held the bracket (see Fig. 8).
4. Disconnect the door linkage arm (C) from the wall-side door and
discard. Re-install the white roller (D) and hardware (see Fig. 9).
5. Disconnect the door linkage arm (C) from the other door but
do not discard.
6. Lift the handle up and back until the springs relax.
7. Adjust the door spring hooks (E) located at the rear of
dishwasher to reduce door spring tension until the front and
side doors open and close without binding (see Fig. 10).
(section end)
TO CONVERT TRACK GUIDES AND DOOR-LIFT FOR CORNER OPERATION
Fig. 7 - Rack Guide (A) Relocation
Fig. 8 - Door-lift Bracket (B) Removal
Fig. 9 - Door Linkage Arm (C) Removal & White Roller (D)
Fig. 10 - Door Spring Hooks (E) Tension Adjustment
A
E
C
B
D
A
15
Bekijk gratis de handleiding van Champion DH3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | DH3000 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9847 MB |
