Champion CG208 handleiding
Handleiding
Je bekijkt pagina 9 van 50
1
1. Move the glasswasher to its permanent location.
2. Open the door and remove the box marked "LEGS".
The box contains (4) 6" [152cm] screw-in legs.
These legs are threaded tightly into the base of the machine.
3. Remove (2) 1/2-13 x 2" bolts holding the glasswasher
to the pallet.
4. Lift the front door off the bottom hinges and set carefully aside.
5. The illustrations below show one method to install the legs
without lifting the glasswasher completely off the pallet.
Installation
Installation
Unpacking
Remove the (2) pallet bolts holding
the glasswasher to the pallet.
Water
Connections
Boxed Legs
Pallet
Drain
Glasswasher plumbing connections extend
below the pallet.
CAUTION:
The glasswasher water inlet plumbing and the drain piping extend below the
pallet. Use extreme care when moving the glasswasher to prevent damage to the
glasswasher plumbing.
NOTE:
The installation of the dishwasher must comply with all local electrical, plumbing, health
and safety codes or in the absence of local codes, installed in accordance with the
applicable requirements in the National Electrical Code, NFPA 70, Canadian Electrical
Code (CEC), Part 1, CSA C22.1; and the Standard for Ventilation Control and Fire
Protection of Commercial Cooking Operations, NFPA 96.
Continued on the next page.
Bekijk gratis de handleiding van Champion CG208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | CG208 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4960 MB |
