Champion CG208 handleiding
Handleiding
Je bekijkt pagina 10 van 50
2
Installation
Installation
Unpacking (continued)
6. Use two people to move the machine in order to install the legs.
7. Have one person behind the glasswasher tilt it back as the person in front twists the machine
to the right. This makes the front left leg mounting hole accessible.
8. Screw one of the legs tightly into place. Repeat this process for the remaining legs.
9. Lift the glasswasher off the pallet, and re-install the front door..
10. Level the glasswasher front-to-back and side-to-side by adjusting the leg bullet feet in or out.
11. Compare the site utilities with the data plate specifications. If they
agree, then proceed with the installation according to the diagrams on the next page.
12. Remove the packing material in the glasswasher and discard, then
remove any protective film on the machine.
Twist the
glasswasher
to the right,
then to the left.
TILT
6"-7½"
1½"
1"
Level front-to-back and side-to-side
Thread (1) leg in each
corner of the
machine base
Tilt the machine back to clear
plumbing connections.
Twist the machine to the right until the front right leg mounting
hole is accessible.
Make sure to install the legs tightly.
Bekijk gratis de handleiding van Champion CG208, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | CG208 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4960 MB |
