Champion 11008 handleiding
Handleiding
Je bekijkt pagina 9 van 15
11008 - 10,000 LB. WINCH
ASSEMBLY
9
5. Turn winch right side up. Disengage the clutch by
moving the cam ring to the “Out” position. Release
the rope and pull through the roller fairlead.
6. Attach the clevis hook to the cable, and then hand
strap to the clevis hook.
NOTICE
Battery terminals coming in contact with metal will
cause a direct short, possibly causing solenoid and/or
battery damage.
Wiring the Winch
FOR WINCH TO FULLY FUNCTION, CONNECT ALL LEADS
CORRECTLY.
CAUTION
NEVER route electrical cables across any sharp edges,
through and/or near moving parts, or near parts that
may become hot.
CAUTION
Battery cables should not be drawn taut. Leave some
slack for cable movement.
1. Connect the battery leads:
1a. Connect the red (+) lead to the positive (+)
terminal of the vehicle’s 12 volt battery.
1b. Connect the black (–) lead to the negative (–)
terminal of the vehicle’s 12 volt battery. (see
wiring diagram)
black
Black
2. Connect the quick connect leads: Insert the male
quick connect into the female quick connect to
complete the wiring.
3. Attach the remote lead to the winch and test for
proper operation.
4. Check for proper drum rotation. Pull and turn the
clutch knob to the “out” position (Free spooling).
Pull out some cable from the drum, and then turn
the clutch knob to the “In” position to engage the
gears. Press the cable out button on the handlebar
switch. If the drum is turning and releasing more
cable then your connections are accurate. If the
drum is turning and collecting more cable then
reverse the leads on the motor. Repeat and check
rotation.
Bekijk gratis de handleiding van Champion 11008, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | 11008 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1919 MB |
