Champion 11008 handleiding
Handleiding
Je bekijkt pagina 8 van 15
11008 - 10,000 LB. WINCH
ASSEMBLY
8
ASSEMBLY
Your CPE 10000 lb. (4536 kg) winch is designed with
a bolt pattern that is standard in this class of winch.
Many winch mounting kits are available that utilize this
bolt pattern for the most popular trucks and Sport Utility
Vehicles/UTV’s and ATV’s. If you cannot find a kit locally,
contact CPE and we will provide you with the name of a
dealer near you.
CAUTION
Mounting bolts must be SAE grade 5 or better and
torque to 34 ft. lb.
CAUTION
If utilizing a mounting plate, ensure that the three
major sections (motor, drum, and gear housing) are
properly aligned. Proper alignment of the winch will
allow for even distribution of the full rated load.
NOTICE
The type of vehicle to which the winch and mounting
plate will be applied, will dictate the type of mounting
kit that should be used (Speed Mount
TM
hitch adapter,
standard mounting plate, or specialty mounting kit).
Assembling the Winch
1. Insert 2 M10×35 bolts to the mounting channel
or plate (not included) hole and attach the roller
fairlead to the mounting channel with the 2 flat
washers, lock washers and nut M10 provided.
2. Turn the winch up-side-down; insert 4 M10 nuts
into the holes of the winch.
3. Place the mounting plate on the winch, making
sure the winch is centered in the middle of the
mounting plate.
4. Attach using the 4 M10 cap screws with 4 lock
washers and flat washers into the hole.
Bekijk gratis de handleiding van Champion 11008, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Champion |
| Model | 11008 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1919 MB |
