Chamberlain CHU48C handleiding
Handleiding
Je bekijkt pagina 12 van 57
12
Test your Keypad has Programmed Successfully
TEST FOR SUCCESS: With the garage door closed, enter the PIN you programmed and
press the HOME button. The garage door opener will open the door. If the garage door
does not open, wait for the garage door opener’s program button LED to turn o (for a
Chamberlain, LiftMaster, Craftsman, or Raynor garage door opener with yellow or white
LEARN button this could take up to 3 minutes). Then repeat the programming steps, go to
“Programming the Keypad”.
TROUBLESHOOTING: If you are trying to program your keypad to a Chamberlain,
LiftMaster, Craftsman, or Raynor garage door opener with a white LEARN button and
previously programmed the same PIN to your keypad with a garage door opener with a
dierent program button, use the programming instructions on page 6.
Please note: if you use these instructions, the garage door will not move - when the garage
door opener lights ash and/or clicks once, the keypad has programmed successfully.
Now that your keypad is programmed and tested, continue to Installation.
Bekijk gratis de handleiding van Chamberlain CHU48C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CHU48C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11039 MB |
