Chamberlain CHU48C handleiding
Handleiding
Je bekijkt pagina 11 van 57
11
Program Keypad to a Chamberlain, LiftMaster, Craftsman, or Raynor Garage
Door Opener with a White LEARN Button Using the Control Panel
IMPORTANT: Read through all programming steps before you start.
01
Follow the instructions below for your control panel model to set your garage door
opener into programming mode.
Control Panel Push Button Door Control Smart Control Panel
X2
Push
Button
Light
Button
12:00
PM
Lift the push bar. Press the
LEARN button twice. The
LED on the door control
panel will pulse repeatedly.
Press and hold the light
button, then press and
release the push button.
The button LED will begin to
ash.
Select MENU, then select
PROGRAM and follow on
screen instructions.
02
30 Seconds
Within 30 seconds of
completing step 01, enter a 4 to
8-digit personal identication
number (PIN), then press and
hold the HOME button until the
garage door opener lights ash
and/or two clicks are heard.
"CLICK"
"CLICK"
To test your keypad has programmed successfully tap here.
White
Bekijk gratis de handleiding van Chamberlain CHU48C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CHU48C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11039 MB |
