Chamberlain CH363C handleiding
Handleiding
Je bekijkt pagina 13 van 15
13
Replacing the Battery: 2-Button Keychain Remote Control
The LED on your remote control will stop ashing when the battery is low and needs to be
replaced. Replace the battery with only 3V CR2032 coin cell battery. Dispose of the old
battery properly.
To replace the battery, follow the instructions as shown below. Reference the illustration
below for each step.
01
With the remote button side down, separate
the top and bottom housings of the remote by
placing a at screwdriver blade into the gap in
the corner of the remote and gently twisting.
02
Pry the top housing from the bottom housing.
NOTE: The logic board could detach from the
remote button. If this occurs, carefully replace
using the guiding holes in the board.
03
Following the “REMOVE” arrows direction
printed on the logic board, with a cotton swab,
push the old battery out of its holder.
04
Following the “INSERT” arrow direction printed
on the logic board, insert the replacement
battery positive side up.
05
Align the remote top and bottom housing and
press so they clip back together.
Bekijk gratis de handleiding van Chamberlain CH363C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH363C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2698 MB |
