Chamberlain CH363C handleiding

15 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 15
12
Replacing the Battery: 3-Button Remote Control
The LED on your remote control will stop ashing when the battery is low and needs to be
replaced. Replace the battery with only 3V CR2032 coin cell battery. Dispose of the old
battery properly.
To replace the battery, follow the instructions as shown below. Reference the illustration
below for each step.
01
On the back side of the remote, using a
Phillips#1 screwdriver, unscrew the captive
screw until it rotates freely.
02
With the remote button side up, pry open the
remote top housing from the bottom housing
(if the housing will not separate, check that the
captive screw is rotating freely).
NOTE: The logic board could detach from the
remote button. If this occurs, carefully replace
using the guiding holes in the board.
03
With a cotton swab, push the old battery out of
its holder in the direction of the nearest edge.
04
Insert the replacement battery positive side up.
05
Align the remote top and bottom housing so
they clip together. Tighten the captive screw
until the top and bottom housing no longer
shift (do not overtighten the screw to avoid
cracking the plastic housing).

Bekijk gratis de handleiding van Chamberlain CH363C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkChamberlain
ModelCH363C
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2698 MB