Chamberlain CH348C handleiding
Handleiding
Je bekijkt pagina 8 van 48
8
Program Keypad to Garage Door Opener with a White LEARN Button Using
the Control Panel
IMPORTANT: Read through all programming steps before you start.
01
Follow the instructions below for your door control panel model to set your garage
door opener into programming mode.
Control Panel Push Button Door Control Smart Control Panel
X2
Push
Button
Light
Button
12:00
PM
Lift the push bar. Press the
LEARN button twice. The
LED on the control panel will
pulse repeatedly.
Press and hold the light
button, then press and
release the push button.
The button LED will begin to
ash.
Select MENU, then select
PROGRAM and follow on
screen instructions.
02
30 Seconds
Within 30 seconds of pressing
the LEARN button, on your
keypad enter a 4 to 8-digit
personal identication number
(PIN), then press and hold the
HOME button until the garage
door opener lights ash and/or
two clicks are heard.
"CLICK"
"CLICK"
To test your keypad has programmed successfully tap here.
White
Bekijk gratis de handleiding van Chamberlain CH348C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Chamberlain |
| Model | CH348C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8546 MB |
