Cecotec Scoba 2100 Station handleiding
Handleiding
Je bekijkt pagina 26 van 61
5150
ENGLISH ENGLISH
Scoba 2100 StationScoba 2100 Station
Accessory for upholstery. Fig. 4
This accessory is used for an intense cleaning of upholstered furniture.
1. To install the accessory for upholstery to the main body, align both so that they match and
t them together.
2. To remove, pull the accessory while holding the main body rmly.
2 in 1 accessory. Fig. 5.
This accessory allows cleaning furniture without damaging it and reaching less accessible dirt
in corners.
1. To attach the 2 in 1 accessory to the main body, align and t both until the accessory clicks
into place.
2. To remove the accessory, pull the 2 in 1 accessory with one hand while holding the main
body rmly with the other.
3.3 Self-emptying station. Fig. 6-7
After use, place the vacuum cleaner in the self-emptying station. When doing so, the station
will automatically empty the dirt tank. The motor of the station will be activated and perform
three self-emptying cycles. Once the process is complete, the appliance will automatically
start charging.
Self-emptying button: to start or pause the self-emptying process, press the button on the
top of the self-emptying station.
Note: if you notice that the vacuum cleaner or dirt tank has not emptied completely, press the
button on the station again to repeat the process.
Indicator lights: the indicator lights will remain on during the self-emptying process as well
as during charging of the appliance.
Dirt tank full warning: when the dirt tank is full, the indicator lights remain lit to indicate that
it should be emptied.
Fig. 7 key:
1. Indicator light
2. Self-emptying button
3. Dirt-disposal bag
4. Door
3. OPERATION
You can use this vacuum cleaner in two dierent ways:
- As a handheld vacuum cleaner, attaching the accessories directly to the main body.
- As an upright vacuum cleaner, using the suction tube with the accessories assembled.
3.1 Using the vacuum cleaner
1. Press the power button to switch the vacuum cleaner on.
2. Use the speed selection button to choose the desired mode.
Display
Fig. 2
1. Power button
2. Speed selection button
3. Battery indicator light
To choose the desired operation mode, use the speed selection button. This vacuum cleaner
features the following modes:
o Eco: low speed mode.
o Turbo: high speed mode.
The appliance features a display that shows the activated mode and the remaining battery
percentage. By default, the appliance will start cleaning in Eco mode. To change the desired
mode, simply press the speed selection button.
3.2 Accessories
This vacuum cleaner includes dierent accessories to clean dierent types of surfaces,
objects and dirt. Some of them are suitable for the upright vacuum cleaner mode, and others
are preferably used with the handheld one.
Assembling the suction tube and vacuum head. Fig. 3
- To install the vacuum head into the suction tube, match both parts ensuring the tab on the
vacuum head matches the guides on the tube and insert the tube into the vacuum head
until rmly xed.
- To disassemble them, press the vacuum head release button, and pull from the suction
tube while rmly holding the vacuum head.
Warning
Regularly check that the vacuum head is clean, as foreign objects can scratch delicate oors.
Bekijk gratis de handleiding van Cecotec Scoba 2100 Station, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cecotec |
| Model | Scoba 2100 Station |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6375 MB |
