Cecotec IronHero 1200 Mannequin Dry Handleiding (92 Pagina's)

Handleiding

IRONHERO 1200 MANNEQUIN DRY

37

ENGLISH

- Make sure all parts and components are included and in good conditions. If there is any

piece missing or in bad conditions, contact the ocial Cecotec Technical Support Service

immediately.

- WARNING: hot surface. The motor unit and telescopic rod heat up during operation.

Do not touch them during or immediately after use.

- Follow the drying instructions for the fabrics you wish to dry.

- Never cover the ventilation outlets or insert objects in them.

Box content

- IronHero 1200 Mannequin Dry drying and ironing mannequin

- 2 telescopic rods

- Support rod

- Y-shaped bracket

- Hanger

- Non-drip protector

- Balloon for top garments

- Balloon for bottom garments

- 4 counterweight clamps

- Instruction manual

3. OPERATION

Instructions on the control panel

1. Power button: press this button to turn the device on or o.

2. Timer increase/decrease button: you can set the timer to 15, 30, 60, 90, 130, or 180

minutes. Press the corresponding button to adjust the timer. A countdown will start and

last for the duration of the set time.

3. Temperature setting button: you can adjust the temperature by pressing ( ) and select

between room temperature ( ), 50 °C, and 60°C if speed is set to LOW and 70 °C if speed

is set to HIGH.

4. Air-speed setting button: press this button to select LOW or HIGH air-speed level.

Assembly

The device includes two telescopic rods that can be used at the same time thanks to the

Y-shaped bracket for bottom or heavy garments, or you can use a single rod for lighter

garments such as shirts.

Assembly for top garments

1. Insert the left and right hangers into the collar section. Fig. 3

2. Loosen the height-adjustment clip and pull the upper rod (a) to adjust the height. Once

Bekijk gratis de handleiding van Cecotec IronHero 1200 Mannequin Dry, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.