Cecotec EnergySilence Aero 4600 Helicopter Handleiding (116 Pagina's)

Handleiding

ENERGYSILENCE AERO 4600 HELICOPTER

46

ENGLISH

3. PRODUCT ASSEMBLY

Installation of the mounting bracket

- Concrete ceiling. Fig. 2

- Wooden ceiling. Fig 3

Drill a φ8 mm hole in the concrete ceiling and insert the bolt. Align the bracket with the hole

and tighten it with a nut.

1. Choose the length of the downrod depending on the ceiling on which the fan is to be placed.

2. Remove the downrod from the box, remove the safety pin and the downrod clip. Fig. 4

Fig. 4 key

1. Power cable

2. Canopy

3. Downrod

4. Coupling cover

5. Clip

6. Screw assembly 1

7. Screw assembly 2

8. Clevis pin

9. Connecting head

3. Insert the downrod into the canopy and the coupling cover, then pass the power cable

through the downrod.

4. Insert the downrod into the central hole of the connecting head. Then insert the clip and

clevis pin previously removed from the downrod. Next, tighten the screw and lower the

coupling cover. Fig. 5

NOTE: the fan blades must be positioned at least 2.3 metres above the ground.

Warning: it is very important that the clevis pin is correctly positioned and that the screws are

properly tightened. Otherwise, the fan may fall down.

Assembling the blades

Fig. 6.

1. Remove the motor screws and set them aside to use them in the next step.

2. Place the blade bracket on the motor assembly. Next, tighten the screws.

3. Place the blades on the bracket and x them using the screws.

Bekijk gratis de handleiding van Cecotec EnergySilence Aero 4600 Helicopter, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.