Cecotec Bolero Hexa C126001 Line A handleiding

Oven

Cecotec

208 pagina's

PDF beschikbaar

Handleiding

/ 208

Je bekijkt pagina 55 van 208

BOLERO HEXA C126001 LINE A

BOLERO HEXA C126001 GLASS BLACK A

ENGLISH

- The power supply cable must be routed so that it does not reach a temperature above

50 ℃ above room temperature and must be protected by insulation with an appropriate

rating.

- Before making the connection, check that the electrical safety of this appliance can only

be guaranteed if the oven is correctly and eectively earthed in accordance with electrical

safety regulations. Always make sure that the ground connection is eective; if in doubt,

call a qualied technician to check the system. Cecotec declines all liability for damage

resulting from a system that has not been grounded.

- Before connecting the appliance to the mains, check that the specications indicated on

the rating plate (on the appliance and/or on the packaging) correspond to those of the

mains supply at home.

- Check that the electrical capacity of the installation and the sockets can withstand the

maximum power of the appliance. If in doubt, contact a qualied technician.

- If the socket and plug of the appliance are not compatible, ask a qualied technician to

replace the socket with a suitable model.

The latter, in particular, will also have to ensure that the cross-section of the socket cables

is adequate for the power used by the appliance. The use of adapters, multiple sockets and/

or extension leads is not recommended. If their use cannot be avoided, remember to use only

single or multiple adapters and extension leads that comply with current safety regulations.

In these cases, never exceed the maximum current capacity indicated on the single adapter or

extension lead and the maximum power indicated on the multiple adapter. The plug and socket

shall be easily accessible.

Installation of knobs. Fig. 5

1. When unpacking the oven, you will nd one oven without knobs installed and two separate

knobs. 5A

2. Observe the left and right knob brackets on the oven, ensuring that the at side of the knob

bracket faces upwards. 5B

3. Align the knob core with the oven bracket and insert it horizontally with force. When

inserting, pay attention to ensure that the scale on the surface of the knob is facing

upwards. 5C

4. Both knobs have been installed correctly. Installation is now complete. 5D

Handle installation. Fig. 6.

1. Verify that above the oven door there is a handle mounting bracket already installed on

each side of the door.

2. Take the handle and conrm that there are mounting slots on both sides of the handles.

3. Take the handle with mounting slots to install it on the mounting bracket by pushing hard

from both sides simultaneously in the direction of the arrows.

04720_04721 Bolero Hexa C126001 Line A_GlassBlack.indd 5504720_04721 Bolero Hexa C126001 Line A_GlassBlack.indd 55 26/4/24 9:4126/4/24 9:41

/ 208

Bekijk gratis de handleiding van Cecotec Bolero Hexa C126001 Line A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.