Cecotec Bolero Flux DT 908010 handleiding

Afzuigkap

Cecotec

77 pagina's

PDF beschikbaar

Handleiding

BOLERO FLUX DT 608010 GLASS BLACK A++/WHITE A++

BOLERO FLUX DT 908010 GLASS BLACK A++/WHITE A++

BOLERO FLUX DT 608010 GLASS BLACK A++/WHITE A++

BOLERO FLUX DT 908010 GLASS BLACK A++/WHITE A++

5958

ENGLISH ENGLISH

7. TECHNICAL SPECIFICATIONS

Product reference:

02847_ Bolero Flux DT 608010 Glass Black A++

02848_ Bolero Flux DT 608010 Glass White A++

02929_ Bolero Flux DT 908010 Glass Black A++

02930_ Bolero Flux DT 908010 Glass White A++

All technical information is available on the public website of the European Product Register

for Energy Labelling (EPREL):

eprel.ec.europa.eu/screen/home

Regulation (EU) 65/2014

EU Directive 2010/30/EU

Rated voltage: 220-240 V~

Rated frequency: 50 Hz

Total power: 215 W

Motor: 210 W

Light: 2 x 1.5 W + 2 x 1 W

800 m³/h air ow

Bulb type: rectangular LED light

Bulb dimensions: 75 x 32 mm

ILCOS Code D: DBL-1.5-S-75/32

Symbol Value Unit

Model reference 02847 / 02848

02929 / 02930

Annual energy consumption AEC

hood

40.1 kWh/a

Time increment factor f 0.6

Fluid dynamic eciency FDE

hood

38.4

Energy Eciency Index (EEI) EEI

hood

35.7

Measured airow at maximum

eciency point

BEP

491.1 m

Air pressure measured at maximum

eciency point

BEP

572 Pa

Grease falls out of the

aluminium lters

The lters are very dirty. Clean or replace the aluminium lters

immediately

The kitchen hood

vibrates

The fan is damaged, causing

the kitchen hood to vibrate

when extracting air.

Please contact the ocial Cecotec

Technical Support Service to replace

the fan.

The engine is not securely

fastened.

Fix the engine correctly.

The kitchen hood is not

securely fastened.

Fix the kitchen hood correctly.

The kitchen hood

is not suciently

extracting

The distance between

the kitchen hood and the

cooking surface is too large.

Readjust the distance.

There is too much

ventilation in the room due

to open doors or windows.

Relocate and reinstall the kitchen hood.

The kitchen hood is

tilted

Fastening screws are not

tightened properly.

Reposition the kitchen hood

horizontally and tighten the screws.

Plastic plugs are not

tightened properly.

Reposition the kitchen hood

horizontally and tighten the plugs.

If none of these situations match your problem, do not attempt to disassemble, or repair the

appliance by yourself. Repairs carried out by unqualied persons may result in injury or serious

malfunctions. Contact the ocial Cecotec Technical Support Service. The repair must be carried

out by an authorised technician, and you must use only original spare parts.

Unauthorised self-maintenance or maintenance will aect the safe use of the product and the

application of the warranty policy.

NOTE:

Any electrical repairs to this appliance must conform to local and/or state laws.

Please contact the ocial Cecotec Technical Support Service in case of doubt and

before carrying out any of the above operations. Always disconnect the device from

the power supply when opening it.

Bekijk gratis de handleiding van Cecotec Bolero Flux DT 908010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.