Cecotec Bolero DressCode 9800 Inverter Steel A Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 122 van 398

BOLERO DRESSCODE 9800 INVERTER A/ STEEL122

ENGLISH

Stain removal

This option allows you to select the type of stains on the laundry for better eciency

during washing.

The appliance adjusts the average wash temperature, drum movement and soaking time

to the specic type of stain. Hot or cold water, gentle or intensive washing and long or

short soaking ensure that the washing sequences are specially adapted to each type of

stain. Selecting this option ensures that the stains are treated in the best possible way.

NOTICE: Pressing and holding the “STAINS” button automatically runs through the set type

of stains.

The duration of the wash cycle varies according to the type of soiling selected.

Before the rst wash

All washing machines are tested before leaving the factory under strict quality control.

This process involves running several wash cycles. As a result, a small amount of water

may remain in the drum and drainage system. Run a “Drum Clean” cycle without laundry to

clean the system before your rst load of laundry.

First add 1 or 2 tablespoons of detergent to compartment I of the detergent dispenser.

Then run the “Drum Clean” cycle.

Wait for the cycle to nish.

Using the washing machine

1. Load the laundry

Open the door and insert the laundry into the drum. Load the items one at a time without

squeezing them or overlling the drum, place them evenly. Please note the load sizes

indicated in the “Washing cycle table”. Overloading of the machine will result in non-optimal

washing and wrinkled laundry.

2. Close the door

Make sure that there are no dirty clothes between the door glass and the rubber seal. Close

the door, make sure you hear the “click” as it closes.

3. Open the tap

Make sure that the appliance is connected to the water mains. Open the tap.

4. Set the desired programme

Select the required programme with the washing programme selector. The duration of

the wash cycle is shown on the display. The machine automatically displays the default

temperature and possible spin speed settings for the selected programme. Adjust the

temperature and/or spin speed settings if necessary, with the corresponding buttons.

/ 398

Bekijk gratis de handleiding van Cecotec Bolero DressCode 9800 Inverter Steel A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.