Cecotec Bolero DressCode 9800 Inverter Steel A Handleiding (398 Pagina's)

Handleiding

/ 398

Je bekijkt pagina 121 van 398

BOLERO DRESSCODE 9800 INVERTER A/ STEEL 121

ENGLISH

Wool

Cycle designed for woollen garments.

IMPORTANT: after use, conrm that the garments have not been damaged or shrunk.

DELAYED END

Press the “Delayed End” button to set the programme end time, which is incremented

in one-hour intervals, up to a maximum of 24 hours. After selecting the desired wash

programme, but before pressing the “START/PAUSE” button, press the “Delayed End”

button until the desired time is displayed, e.g. 8h, with the “Delayed End” indicator light on.

NOTE: The cycle time is included in the set deferred end time.

Example of a cycle time of 1 hour and 30 minutes and a delayed end time of 8 hours.

8 h is shown on the display and a countdown (approx. 6 hours and 30 minutes) until the

wash cycle starts, then the cycle duration 1: 30 is shown and starts. The total time is

approximately 8 hours.

The way to cancel the deferred termination function is as follows:

- Turn the wash cycle selector to reset the wash cycle. The “Delayed Completion”

indicator light will go out.

NOTE:

The actual end time of the wash cycle may be dierent from the set delayed end time,

depending on multiple factors such as water supply pressure, drainage, type of laundry,

water temperature, as well as other conditions.

Child Lock

1. The setting of the child lock function can prevent malfunctions or unwanted incidents.

2. During operation, press and hold the “SPEED” button for approximately 3 seconds to

set or cancel the child lock function.

3. After setting the child lock function, its indicator light comes on, the door cannot be

opened and the control panel is locked, the buttons remain inactive, as well as the

wash cycle selector (the indicator light below the power symbol is on ). The machine

can only be switched o by turning the wash cycle selector to its OFF position, the

indicator light below the power symbol will go out and the device will stop operating. If

the machine is switched o, the child lock function will be cancelled.

4. When the machine is switched on again, it will directly run the selected programme

before it was switched o.

/ 398

Bekijk gratis de handleiding van Cecotec Bolero DressCode 9800 Inverter Steel A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.