Cecotec Bolero DressCode 8900 Inverter A Handleiding (468 Pagina's)

Handleiding

/ 468

Je bekijkt pagina 133 van 468

Bolero DressCode 8900 Inverter FullColor A

Bolero DressCode 8900 Inverter FullColor Steel A

Bolero DressCode 8900 Inverter FullColor Ice Blue A

133

ENGLISH

The high speed spin

must be repeated many

times (spinning).

Due to dierent types and materials of laundry, the load

balancing system of the appliance may wobble and

scatter the laundry many times to extend the spin time.

This is a normal phenomenon, not an incidence of the

machine.

Machine does not spin No spin speed has been selected. The control panel

displays “—“

The machine vibrates a

lot during the spin cycle

The feet have not been adjusted, causing the machine to

rock.

New installation: the transport screws, including the

plastic spacer, or the polystyrene packaging, has not been

removed when installing the machine.

The appliance is trapped between furniture and/or walls.

The load is slightly unbalanced, and the device is rotating,

but at a slower speed.

Spinning result is not

optimal

When you wash less laundry, such as a pair of jeans, a

jumper, a bath towel, etc., the machine may not complete

the spin process due to balance protection.

If the load is slightly unbalanced, the appliance will spin,

but at a lower speed, not at the cycle’s default spin speed

or the spin speed setting for the cycle.

Machine does not drain,

drains slowly or “E03”

appears on the display.

The top of the drain hose is too high. It should be installed

at a height of 65-100 cm from the ground.

The draining pump lter is blocked.

Drain hose is kinked or bent.

Drain hose is blocked or frozen.

The washing programme

time stops counting

before entering the high-

speed spin process.

This is not an issue. The load balancing system of the

appliance tumbles and scatters the laundry in the drum

for a long time to achieve balance and complete the high

speed spin. In the process of tumbling and scattering,

the programme time stops counting before the appliance

reaches the high speed spin process.

Washing programme

lasts too long

Programme times will vary due to water pressure,

incoming water, temperature, etc.

If the wash load becomes unbalanced, the time will

increase.

/ 468

Bekijk gratis de handleiding van Cecotec Bolero DressCode 8900 Inverter A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.